How to Make a Hamster Bin Cage

adminsatu

adminsatu

Choose a large, clear bin with lots of floor space and high-ish walls, and a lid that fits.,
Make sure you have the following: Electric drill, hacksaw, wire mesh (also know as chicken wire), and zip-ties.

,
Outline a big area on the lid or side to be cut.,
Cut or drill the area to be cut.,
Drill lots of holes on each side of the hole.,
Drill 4 holes in a diamond shape.,
If you want to make the lid extra extra secure, use a hot glue gun to glue down the wire insert or florist wire too.

,
You’re done!

The smallest bin you should get is 106 quarts. If possible, buy the bins with 110-120 quarts. These cost around $11-$15, possibly even more depending on where you are buying from. Common stores to buy bins from are Walmart, Target, Hobby Lobby, Lowes, Home Depot, etc.;
,, Cut out a wire a little bit bigger than what you just marked.

, Be sure to be patient, slow and steady so you don’t crack the plastic.

, Place florist wire or wire insert down and begin to lace the picture wire or other wire through the florist wire or wire insert. Lace through all drilled holes.

, Do this twice on the wide sides and once on the long sides. Drill on the TOP, not near the bottom of the bin.

,, Congrats on making a great cage!

Comments are disabled.